A DoorEdge controller is:

A signal processing and safety monitoring unit that connects the safety edge (door edge sensor) to the main door control panel, ensuring correct operation and fail-safe response.

In simple terms:

• The safety edge = sensor
• The DoorEdge controller = “brain” that interprets that sensor

Core Function

The DoorEdge controller sits between:

• Safety edge (optical or conductive)
• Main control unit (e.g. CS series)

It performs 3 critical tasks:

Signal evaluation

• Monitors the safety edge signal continuously
• Detects:
  • Compression (activation)
  • Faults (broken cable, short circuit)

Safety logic processing

• Converts the edge signal into a safe control signal
• Ensures:
  • Immediate stop
  • Or reversal of the door

Fail-safe monitoring

• If anything goes wrong:
  • Cable break
  • Power loss
  • Sensor fault

Technical Specifications Electrical

• Supply voltage:
  • 12–24V AC/DC (from control panel)
• Current consumption:
  • Low (<100 mA typical)

The controller forces the system into a safe state (door stops / won’t close)

(The Company reserves the right to amend product specifications and information without notice.)